Knight Bastard Medieval Sword (#1329)
The Medieval Knight Bastard Sword is a classic example of the Medieval swords found during the later part of the 14th C. These battle ready swords, along with their historical counterparts were commonly used by the nobility during the 100 years war, between England and France (1337 to 1453) .
Blade: 5160 High Carbon Steel. Dual Tempered HRc 60
48-50 at the core
Fittings : Mild Steel
Distal Taper: 6.5mm – 3.7mm
Total Length: 44″
Blade Length : 32.5″
Grip Length: 9″
POB: 3.5″
Weight: 3 lbs 3 oz.
CAD838.20 – CAD1,061.72
The Medieval Knight Bastard Sword is a classic example of the Medieval swords found during the later part of the 14th C. As the European longsword developed through the middle ages, it adapted to suit the needs of the wielders. Early in the Medieval period the classic knightly sword was more commonly of the “arming sword” variety – single handed and double edged, meant to be wielded with a shield. As armor quality increased single handed swords as primary weapons became less effective, and were relegated to the position of sidearm. Longswords and two-handed sword became more prominent, being more effective against armored foes and more versatile in combat. An example of when these swords were commonly used would be by the nobility during the 100 years war between England and France (1337 to 1453).
The term “bastard sword” refers to any sword that can be used with equal effectiveness with either one hand or two; with one hand to pair with a shield or for extra reach, or with two hands for greater power and maneuverability. This particular reproduction by Darksword Armory is based on an original found in the Royal Armouries in Leeds, England. A fully battle ready type XIV blade tapers decisively from the hilt to along and graceful point, complimented by a deep fuller that travels roughly 2/3the length of the blade. The guard is gently sloped from the hilt, which is wrapped in leather. A classic wheel pommel, common to the type XIV, completes the sword.
The Medieval Knight blade, crafted with a sharp taper, was common during the medieval swords of the 14th C. These highly tapered blades were engineered to counter the ever increasing plate armors emerging during the start of the 14th C. To offset these defensive measures, swords with long, narrow, deeply tapered blades and reinforced thrusting tips were favored, not only by the German and Italian armies, but also by the English, and later the French. While keeping the traditional crucifix form, the Medieval knight bastard sword’s guard curves slightly to block and parry incoming blows. The guard is individually crafted from mild steel and finely shaped with smooth, classically elegant octagonal lines.
The long hand-and-a-half handle allows the sword to be held in one or two handed fashion. While the base of the blade provides the strength to cut through opponents, the strong yet tapered tip allows for deadly thrusts, exceptional response and effective stabbing.
Hand crafted and properly engineered for durability in combat, the Medieval Knight Bastard sword is a very solid, responsive, and perfectly balanced weapon. The blade, hand forged with 5160 High Carbon Steel, is skillfully Dual Hardened for exceptional cuts while remaining flexible for enduring combat.
As with all our swords, the Medieval Knight Bastard Sword is a battle ready sword, and is among our staff’s favorite medieval swords due to its clean lines, superb handling characteristics, and beautiful blade geometry. It is authentic in every detail and classically elegant. The Medieval knight bastard sword will please even the most discriminating collector.
Blade: 5160 High Carbon Steel. Dual Tempered HRc 60
48-50 at the core
Fittings : Mild Steel
Distal Taper: 6.5mm – 3.7mm
Total Length: 44″
Blade Length : 32.5″
Grip Length: 9″
POB: 3.5″
Weight: 3 lbs 5 oz
8 reviews for Knight Bastard Medieval Sword (#1329)
Add a review
Related products
Medieval Swords
CAD838.20 – CAD1,012.83
This product has multiple variants. The options may be chosen on the product page
Broadsword
CAD810.26 – CAD991.87
This product has multiple variants. The options may be chosen on the product page
Broadsword
CAD810.26 – CAD991.87
This product has multiple variants. The options may be chosen on the product page
Medieval Swords
CAD838.20 – CAD1,054.74
This product has multiple variants. The options may be chosen on the product page
Medieval Swords
CAD747.40 – CAD963.93
This product has multiple variants. The options may be chosen on the product page
Arming Swords
CAD768.35 – CAD942.98
This product has multiple variants. The options may be chosen on the product page
Longsword
CAD880.11 – CAD1,103.63
This product has multiple variants. The options may be chosen on the product page
Medieval Swords
CAD712.47 – CAD915.04
This product has multiple variants. The options may be chosen on the product page
Fantasy Swords
CAD698.50 – CAD852.17
This product has multiple variants. The options may be chosen on the product page
Longsword
CAD838.20 – CAD1,054.74
This product has multiple variants. The options may be chosen on the product page
Medieval Swords
CAD810.26 – CAD1,026.80
This product has multiple variants. The options may be chosen on the product page
Fantasy Swords
CAD817.25 – CAD998.86
This product has multiple variants. The options may be chosen on the product page
Dave, L., Ont, Canada –
I Have just received my beautiful, beautiful sword and have been so inspired that I have quit work and signed up with von Frundsberg for the march on Rome. Will tell you how the looting goes as soon as we flatten the place. Best regards, and thanks!.
Benet, G., Texas, USA –
I just received my Knight Bastard Medieval Sword after much deliberation vs the Medieval Knight…The sword after my immediate swings felt absolutely alive with great tip control…now for some destructive testing…
Eric, U. Ohio, USA –
The Knight Bastard Sword was exactly what I had hoped for: a light two-handed sword, slightly smaller and more maneuverable incarnation than other larger two-handed swords, with exceptional thrusting and slicing capabilities. This sharpened version of Knight Bastard Sword is entirely functional, extremely well balanced, easy to wield, and it is a beautiful work of art. Bravo Darksword Armory!
David –
Verified Purchase
Expertly crafted and sharpened to a clean paper slicing test success, fully both sides of the blade. I was immediately enthused with this sword. This is a stiff blade with just enough flex and perfect balance for the cut or thrust. The fit and finish is perfection from tip to pommel. There is plenty of room on the hilt for a second hand should you desire. One or two handed this sword handles as an extension of ones own arm, very lively. Extremely happy with this sword from Darksword Armoury.
James Lavender –
I received my sword I’m blown away how nice it is. It came very quickly well oiled and sharp. Darksword armoury are the real deal. Looking forward to getting my next sword.
Robert Raycroft (verified owner) –
From Pivot Points to the Point of Balance, this sword is designed for use.
Wonderfully executed convex grind on the edge, with mirror polish over all.
This sword has quickly become my favorite in the collection.
Thank You DSA for making me a beautiful sword.
Craig Stahler –
Wow second sword I’ve purchased, and I continue to be impressed. It is very light and nimble in the hand. Truly responsiveness 2 hands or 1. The blade is both flexible yet firm strong in a thrust. It devastated the shipping container with just a few light swats. So yes also very sharp.
Really my only complaint would be all cellphone wrapping lol
Warren Harvey (verified owner) –
Great sword, continues to be my favourite in my collection. Light weight and very nimble, looks lovely and of all my swords it is the most commented on and a favourite for ‘touching’. Only complaints were the packaging for shipping and factory sharpness, wasn’t as sharp as what I thought it would be and compared to my Albion sword, they could have splurged on the shipping a bit more. Bonus was the sheath and a stilleto they sent…